Memory mapped io vs io mapped io6/17/2023 ![]() As for how useful it is for functional operation, well, it's mandatory and heavily utilized. There's a bare minimum that all PCIe devices have to implement, and then the more advanced devices can implement more. The way PCI config space works, there is a pointer at the end of each section that indicates if there is more "stuff" to be read. Next, you asked if it was a common set of registers across all PCIe devices - yes and no. ![]() However, they are mapped into the system memory map. You stated these are "allocated into RAM" - not true, the actual bits / stateful elements are in the peripheral device. For instance, when you read the Vendor ID or Device ID, the target peripheral device will return the data even though the memory address being used is from the system memory map. This 4KB space consumes memory addresses from the system memory map, but the actual values / bits / contents are generally implemented in registers on the peripheral device. A PCI device had a 256 byte configuration space - this is extended to 4KB for PCI express. Any addresses that point to configuration space are allocated from the system memory map. I'll jump to your 3rd one - configuration space - first. From a software point of view, they are very, very similar. We'll ignore all the special / reserved areas, TOLUD (top of lower usable DRAM, Intel parlance) holes, etc. It's been awhile since this was asked, but I hate orphaned questions :)įirst, let's over-simplify a modern x86 platform and pretend it has 32-bits of address space from 0x00000000 to 0xFFFFFFFF. I understand that whenever any PCIe device attached with root complex, it will be assign with some memory region. I am referring the Base specification, But I think it's written for the readers having some prior knowledge of PCI and PCIe.Īlso please refer some free online references useful to speed up the understanding of base specification. I am new to the PCIe, and trying to learn it. Is this register gets used to specify the address available in PCIe endpoint ? This space contains BAR (base address register). Is this space is common between all PCIe devices ? And how it's useful for PCIe functional operation ? processor's memory).Ĭonfiguration space is the space allocated for common set of registers (present in all PCIe devices). These all spaces are allocated into RAM (i.e. There are four address spaces in PCI express:Ĭan anyone please explain significance of each address space, and it's purpose in brief ?
0 Comments
Leave a Reply. |